10g 1 inch Threaded Taper with 1.2mm Threading
10g 1 inch Threaded Taper with 1.2mm Threading
Buy More - Save More | As low as
$0.55
Buy More - Save More | As low as $0.55
-
- 1+ Units $0.75
- 10+ Units $0.69
- 100+ Units $0.55
Description
Description
10g 1 inch Threaded Taper with 1.2mm Threading
Taper is 10g at its thickest point and has a 1.2mmx2.0mm thread on the end.
We made these primarily for the 10g anchors we sell. Keep in mind that most of the 10g jewelry we sell that is internally threaded is 2.0mm thread pattern.
The size of the taper is the thickest part.
Measures 1 inches long (25mm long)
Made from 316L Stainless Steel. These are Autoclave safe.
Piercing Tools
Size Table
Size Table
Standard Body Jewelry Measurements
The following webchart is a quick reference guide for standard body jewelry measurements and how to measure basic body jewelry. Please print this webchart to help measure your body jewelry accurately.
Visit our PainfulPleasures Infocenter for additional body jewelry information. There, you will find detailed articles on standard body jewelry sizes, how to measure body jewelry, basic body jewelry, and more.
Standard Body Jewelry Threading
Ensure compatibility between standard (non-custom) PainfulPleasures body jewelry parts using the tables below. More information on threading, including custom thread patterns, can be found in our Threading Infocenter article.
Internally threaded jewelry has a threaded post on the top and/or end, which is then inserted into a threaded hole in the barbell shaft.
Internal Thread Patterns by Gauge
|
Gauge |
18g, 16g |
14g, 12g |
10g–00g |
|
Internal Thread Pattern |
0.8mm or 0.9mm |
1.2mm |
2.0mm |
Externally threaded jewelry has a threaded post on the barbell shaft, which is then inserted into a threaded hole in the top and/or end.
External Thread Patterns by Gauge
|
Gauge |
18g, 16g |
14g, 12g, 10g |
|
External Thread Pattern |
1.2mm |
1.6mm |
